Full Dip Yellow Fluorescent 4 Litre Sprayable
The full dip yellow fluorescent 4 litre neon liquid vinyl is amazing.
Full Dip Yellow Fluorescent 4 litre
The neon or fluorescent colours are becoming more popular.At first some trim or wheels.Now cars and motorbikes have been fully dipped in fluorescent. Go full on with full dip glossifier or high gloss top coat for a spectacular Gloss finish.
The neon colours are characterised by extra strong colour intensity for full effect.
All Full Dip fluorescents
Apply over a white base colour for best results before you spray any Fluorescent colour.
Will wrap, protect and change the colour of your project with a metallic finish. You can add glossifier or high gloss as a top coat for desired effects.
It can be removed by peeling it, as if it were a conventional vinyl.
Long research and development process from pioneers in the liquid vinyl spray for quality products.
Auto Levelling Additives for that perfect smooth finish.
Long lasting, still removable after 10 years.
Full Dip Fluorescent
Wraps, protects and changes colour with matte finish. It can be removed by peeling it, as if it were a conventional vinyl.
change the colour of your Car, motorbike, alloy wheels, badges, emblems, grilles and interior Trim.
Use around the Home or Garden, arts & crafts. You can full dip almost anything.
Our Full Dip aerosols include two nozzles, each designed for a function: standard nozzle flow and high-flow nozzle for larger areas. Simply swap them to get the fan size you want, wide and wider.
Air dried, flexible, liquid coating for use on almost anything
Liquid Vinyl spray application, once dry becomes a tough elastic and durable film.
It can be easily removed from most surfaces if required,Plastic,glass and metal.
You will need an average of 4-6 coats. Add more layers for greater protection. Sprayable Liquid Wrap in a Can.
You can clean Full dip with most soaps, and it will resist water, mud or pressure water cleaning.
No cracks or self peeling over time, remains flexible and stretchy, and will not become brittle or crack.
Before you start spraying the liquid vinyl, you need to have the surface completely clean, dry and free of any substance that may be capable of causing non grip (as waxes, cleaners etc). It is advisable to ensure that the surface is clean as possible without dirt (such as sand , dust, road tar, brake dust etc.) Full Dip® will bond to the surface you spray it on, and thus, if the surface is not 100% clean, you will get imperfections and faults.
So it is important you clean properly (even those annoying parts and between spokes on wheels). Cleaned perfectly and you will get uniform even finish that lasts years.
Full Dip® can be applied to any surface such as metals, plastics, glass, wood, etc.. However it may best to do a small pre-test on an insignificant part of your project before committing to the full project to make sure it is 100% compatible to what you are spraying over with no adverse reaction.
Application of Full Dip Fluorescent 4 litre can
Ready to spray, No thinning required. Just Shake the tin well, open lid and mix well with a mixing paddle.
To apply this full dip product you need to have a spray paint gun. The Earlex MS3000 , Full Dip FD650 or other types or traditional compressor setup. This will give a better finish, but you need to spend more on a compressor setup.
The FD650 is a very affordable and easy to use first time spray gun.
Apply the product approx. 20 cm range, always moving parallel to the surface.
We recommend cleaning the spray gun approximately every two pot fills. cleaning with universal solvent, pour in a small amount and blow out through gun.
Keep a cloth handy to wipe the spar tip often to avoid drips.
You can apply as many coats as you want , keeping in mind that we will need an average of about 4 coats, but remember that the more applied will be tougher more durable finish, and easier to peel.
It is important that the first coat of paint applied is only a dust coat. This is important since the first coat serves as a primer and gives good grip for the next coat. Go too heavy on this first coat and expect to get runs.
Between coats you must wait at least 10-30 minutes flash off time. After the last coat of Full Dip, let dry for 12 hours before handling the project.
We recommend always using a mask during application.
As a beginner, we recommend you do 2-3 light dust coats until you get better and confident with it. Full Dip is slightly thinner and more chance of getting a run, so take your time until you get use to your spay gun.
Apply the product approx. 20 cm range. Always parallel to the surface you are spraying. You can apply as many coats as you want, keeping in mind that you will need an average of 4-6 coats. But remember, that more coats you apply, the more durable it will be. The result will be better and more easily peeled if you want to remove in the future. Use less coats, two or three, then expect problems like hard to remove,poor finish and durability. Between coats, you must wait at minimum 10-30 minutes. Full dip will be touch dry in 10-30 minutes, but to be completely dry you need wait 12 hours. We recommend 100% using a proper PPE mask during application. Once dried / cured, your project is ready to use.
Full dip yellow fluorescent 4 litre – Mix-pour-Spray Be Amazed
Instructions for use on full dip yellow Fluorescent 4 litre, please go to our application Guide for Spraying.