Full Dip Black Matte Aerosol Spray
With full dip black matte you can change the colour of your Car, motorbike, alloy wheels, badges, emblems, grilles and interior Trim.
Colour code your Wing Mirrors,Car roof or add some cool bonnet Stripes.
Use around the Home or Garden, arts & crafts. you can full dip almost anything.
Matte Black Full Dip looks great on its own or with a gloss coat or two of glossifier.
Matte black is also used to apply multiple base coats before spraying some Candy pearl and chameleon colours as they will not work without base coat.
Full Dip Wraps, protects and changes colour with matte finish. It can be removed by peeling it, as if it were a conventional vinyl.
Tolerance / Reaction Test
Full Dip® can be applied to any surface such as metals, plastics, glass, wood, etc.. However it may best to do a small pre-test on an insignificant part of your project before committing to your full project and make sure it is completely compatible with the surface you are spraying over.
Liquid Vinyl application means spray that once dry becomes a tough elastic and durable film.
It can be easily removed when applied to glass,plastic or metal.
Full dip can be cleaned with most soaps, and resists water, mud or pressure water Cleaning.
No cracks or peeling off with the time.
A Full Dip 400ml spray covers up to 1.2 m2
2 nozzles for easy application, wide and wider. Simply swap them to get the fan size you want.
1. SURFACE PREPARATION
Before you start spraying the liquid vinyl, you need to have the surface completely clean, dry and free of any substance that may be capable of causing non grip (as waxes, cleaners etc). It is advisable to ensure that the surface is clean as possible without dirt (such as sand , dust, road tar, brake dust etc.) Full Dip® will bond to the surface you spray it on, and thus, if the surface is not 100% clean, you will get imperfections and faults.
So it is important you clean properly (even those annoying parts and between spokes on wheels). Cleaned perfectly and you will get uniform even finish that lasts years.
1.2 TOLERANCE TEST
Full Dip® can be applied to any surface such as metals, plastics, glass, wood, etc.. However it may best to do a small pre-test on an insignificant part of your project before committing to the full project to make sure it is 100% compatible to what you are spraying over with no adverse reaction.
2. APPLICATION OF Full Dip®
2.1 SHAKE IT
Shake vigorously before use. At least a minute to mix all the internal elements.
2.2 SPRAY IT
Apply the product approx. 20 cm range. Always parallel to the surface you are spraying. You can apply as many coats as you want, keeping in mind that you will need an average of 4-6 coats. But remember, that more coats you apply, the more durable it will be. The result will be better and more easily peeled if you want to remove in the future. Use less coats, two or three, then expect problems like hard to remove,poor finish and durability. Between coats, you must wait at minimum 10-30 minutes. Full dip will be touch dry in 10-30 minutes, but to be completely dry you need wait 12 hours. We recommend 100% using a proper PPE mask during application. Once dried / cured, your project is ready to use.
3. WONDERING WHAT TO DO FOR THE WEEKEND?
Buy a couple of Full Dip black matte Aerosol Cans and have some fun.