Full Dip Pro High Gloss Top Coat
Full Dip Pro High Gloss Top Coat-2k clear-fuel and scratch resistant.
Kit Contains 2 litres of gloss, 1 litre hardener and 250 ml of thinner. 3.25 litres in total.
This kit will do two small cars like ford fiesta or one medium size car like C Class Mercedes as very little is required.
Fuel and scratch resistant Peelable High Gloss
NOT designed for DIY use. PRO Gloss Requires a compressor and spray gun setup to do properly.
mix the gloss and hardener 2:1 add 7.5% thinner (2 litres gloss, 1 litre hardener, 250 ml thinners = 3.25 litre)
Ready to spray.
2 stage application.
one dust coat and one or two wet coats (2 wet coats if flatting and polishing).
This product is not recommended for the non professional. It contains chemicals that are not good for you. You need the proper PPE equipment. Full protective suit and at minimum an organic, inorganic mask.
You can flat and polish this when fully cured.
Spraying Top Coat
Use a compressor setup. You can use a Sealey S701g 1.4 at @ 24psi and get good results. You can use better guns, and you will get better results. If you spray in a professional booth, again you will get better results. Remember a lot of videos of the really good finishes are sprayed by professional car painters in a £10k booth with £500 guns! Do not expect perfection. Dust is your enemy with this product. You could get away with it, with just a normal matte / satin dip finishes, but high quality matte / gloss finishes will show up dirt and dust badly. Just be realistic in your expectations.
Minimum Base coats
If you do not put minimum seven wet coats of Full Dip liquid wrap down you will struggle to peel off in the future. It will not be the products fault, but your own for skimping on product to start with.
This is pretty difficult to spray properly to get flat and have no runs. Not suitable for first time spraying at all. We would say at least 5 full dip spray projects before you attempt this.